Monolithic structure Infinitively variable spindle speeds (Inverter)
Powered small tool post
400 - 500 - 550 – 600
Technical Specifications | 315 | 380 | 400 | 500 | 600 | |
Height of centers | mm | 315 | 380 | 400 | 500 | 600 |
Swing over bed | mm | 630 | 760 | 800 | 1000 | 1200 |
Swing over cross slide | mm | 350 | 480 | 500 | 670 | 850 |
Distance between centers | m | 1.5-2-3-4-5-6 | 1.5-2-3-4-5-6-7-8-9-10-11-12 | |||
Bed width | mm | 550 | 600 | |||
Bed structure | Monolithic | |||||
Weight | 400 | 500 | 550 | 600 | ||
Weight of the lathe of 3000 mm (D.B.C.) | Kg | 8500 | 8800 | 9100 | 9400 | |
Each additional meter | Kg | + 1200 | ||||
Standard equipment
Bed – Headstock – Tailstock – Carriages made of cast iron
Bed guideways are induction hardened and ground
Headstock with induction hardened and ground gears; spindle is assembled on high accuracy bearings
Carriages are sliding on antifriction material
Monolithic structure
Infinitively variable spindle speeds (inverter + potentiometer to increase/decrease spindle speed + rpm-counter display)
Powered small tool post
Rapid feeds
Tailstock displacement along bed by handwheel and rack system
Electric plant with low voltage control panel; it is placed in a suitable airtight cabinet. Make of components is Siemens and/or Schneider
Spindle reduction sleeve
2 Dead centers
Safety protections according to EC standards: plexiglas safety chuck guard with microswitch – turret plexiglas safety guard – rear protection along full length of the machine – protection of leadscrew and feed bars – emergency mushroom button
Chip tank on wheels
Cooling system with electro-pump
Central lubrication of guideways with automatic pump
Steady rest and follow rest
Service tools and wrenches – Test certificate – Full electric diagram – Operation and maintenance book – Machine built according EC standards
Optional equipment
Manual tool holder turret: Squared (4-way tool post) – Quick change turret – Indexing turret – Multifix turret
3 or 4 jaw self centering chuck
4-jaw independent chuck
Live center
2 or 3 axis digital readout
Steady rest with larger Ø than standard one
Roller support steady for heavy loads
Work area lighting
Cutting Surface Speed
Variable spindle speeds (Inverter)
Taper turning attachment
Grinding equipment
Levelling and anchoring pads
