Infinitively variable spindle speeds (Inverter)
180 - 200 - 215 - 205 – 230
Technical Specifications | 180 | 200 | 215 | 205 | 250 | |
Height of centers | mm | 180 | 200 | 215 | 205 | 250 |
Swing over bed | mm | 360 | 400 | 430 | 410 | 500 |
Swing over cross slide | mm | 190 | 250 | 240 | 245 | 295 |
Distance between centers | m | 0.8-1-1.5 | 1-1.5 | 1-1.5-2 | ||
Bed width | mm | 260 | 290 | 305 | ||
Weight | 180 | 215 | 250 | |
T x 1000 | Kg | 2000 | 2100 | 2300 |
T x 1500 | Kg | 2300 | 2400 | 2600 |
Standard equipment
Infinitively variable spindle speeds (inverter + potentiometer to increase/decrease spindle speed + rpm-counter display)
Air device on the tailstock to ease the displacement along bed
Bed – Legs – Headstock – Tailstock – Carriages made of cast iron
Bed guideways are induction hardened and ground
Headstock with induction hardened and ground gears; spindle is assembled on high accuracy bearings
Electric plant with low voltage control panel; it is placed in a suitable airtight cabinet. Make of components is Siemens and/or Schneider
Spindle reduction sleeve
2 Dead centers
Safety protections according to EC standards: plexiglas safety chuck guard with microswitch – turret plexiglas safety guard – rear protection along full length of the machine – protection of leadscrew and feed bars – emergency mushroom button
Chip tank on wheels
Cooling system with electro-pump
Central lubrication of guideways with automatic pump
Steady rest and follow rest
Service tools and wrenches – Test certificate – Full electric diagram – Operation and maintenance book – Machine built according EC standards
Optional equipment
Manual tool holder turret: Squared (4-way tool post) – Quick change turret – Indexing turret – Multifix turret
3 or 4 jaw self centering chuck
4-jaw independent chuck
Live center
2 or 3 axis digital readout
6 position longitudinal stop
Thread chasing dial
Work area lighting
Cutting Surface Speed
Taper turning attachment
Grinding equipment
Levelling and anchoring pads
