UNI 60 Combi-Cal is a roll bending machine designed for bending a wide range of tubes, profiles and flat bars. In tube bending mode, it can perform bends from 0° to 180°. The machine is designed for mandrel-free bending.
Technical specifications:
Cast iron body, steel base
Single-phase self-braking motor, 230 V / 50 Hz / 1.5 kW, 2800 rpm
24 V low-voltage control board
Bending angle: 0–180°
Bending angle adjustment
Digital electronic control unit with a multilingual processor for programming, controlling and recalling bending angles. Stores up to 50 programs, with 9 bends per program.
Dimensions: 780 × 430 × 1000 mm
Weight: 170 kg
Tube Type / Bending Capacity | Diameter, mm | Wall thickness, mm |
Rectangular tube | 50*25 | 2,5 |
Flat bar | 20 |
|
Rectangle | 50*8 | |
Square tube | 40*40 | 2 |
L-profile | 40*40 | 3 |
T-profile | 40*40 | 5 |
U-profile | 30*15 | 4 |
Gas pipe | 1*1/2 | 3,2 |
Square | 20*20 |
