Technical specifications:
Description | LP/3000 |
Maximum working length | 3000 mm |
Maximum working width | 100 mm |
Maximum working height | 60 mm |
Brush diameter | 350 mm |
Suction point | 120 mm |
Brush speed | 2800 Rpm |
Working speed | 0 – 16 m/min |
Weight | 950 Kg |
Dimensions | 4000*1075*2235 |
Single speed motor | 5,5 kW |
Motorized lift up and down with a button | 0,55 kW |
Description:
The part is mounted on the machine and clamped on one side by plates, while on the other side it is pressed against the plates by hydraulic cylinders (adjustable depending on the length). At this point, the brush being used is lowered, and the motor speed is adjusted. The brush begins to move and machine the entire surface. The working pressure is manually adjusted during operation, and the height can be read on the ammeter. The machine can be equipped with an automatic brush wear compensation system. The number of passes per part can be set.
